Daewoo RFS-26D1 Series Installationsanleitung PDF herunterladen (Seite 24)

CONTENTS REMARKS

12) “ES” error (Water/Crushed ice/Cube ice) error)

Cause : When they sense 1min continuously

Check the buttons(“Water/Crushed ice/Cube ice“) of the FCP.

* When all ERROR CODE is normal, the Refrigerator reset

9) Door error (“dF” “dR” on display)

Cause : in case it senses that door is open for more than 1 hour.

Check point : F/R door is opened or not.

8) “C1” error

Cause : in case comp. works for over 3 hours when FD-S or RD-S temp. is over 23 ℉

Check point : Refrigerant leakage.

11) “r3” error

Cause : in case defrosting return is done by time limit of 50 min

Check point : Measure the resistance between both terminals of the Fridge defrost heater.

(Assembled with evaporator)

10) “F3” error

Cause : in case defrosting return is done by time limit of 50 min

Check point : Measure the resistance between both terminals of the Freezer defrost heater.

(Assembled with evaporator)

13) “d2” mode (A/S forced defrosting mode)

Push “Fridge Set” button 5 times while pushing “Freezer Set” button

simultaneously.

Control : A/S forced defrosting control

If FD-sensor or RD-sensor temp is over 55℉, the mode is terminated automatically.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 66 67

Keine Kommentare

Daewoo RFS-26D1 Series Installationsanleitung Seite 24